• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 1-26.Attaching BNC connectors to coaxial cable
Figure 1-28.Attaching HN connectors to coaxial cable

Neets Module 19-The Technicians Handbook
Page Navigation
  64    65    66    67    68  69  70    71    72    73    74  
1-69 Table 1-14.—BNC Series Connectors with Associated Cables Plug Jack Panel Jack For Use With Cable Types Improved Version: UG-88E/U UG-89C/U UG-291C/U RG-55/U, 58/U and 223/U UG-260D/U UG-261C/U UG-262C/U RG-59/U, 62/U and 71/U Captivated Contact Version (Amphenol): 31-301 31-302 31-300 RG-55/U, 58/U, 141/U and 142/U 31-304 31-305 31-303 Rg-59/U, 62/U, 71/U and 140/U HN series connectors have a 50-ohm impedance and threaded coupling connectors designed for high-voltage applications. These connectors are weatherproof. The frequency range is 0-4 gigahertz. The HN series is used with medium size coaxial cable such as RG-8/U, RG-9/U, RG-87/U, RG-213/U, RG- 214/U, and RG-225/U. Figure 1-27 shows three typical HN connectors. Figure 1-28 shows how HN connectors are attached to coaxial cable. Table 1-15 indicates which HN connector to use with what coaxial cable type. N series connectors are low-voltage, 50-ohm, threaded coupling connectors designed for use with small and medium size rf cable. They have a 1,000 volts peak rating and are weatherproof. There is a group of N series connectors that are 70 ohms and are numbered UG-98A/U and UG-96A/U. These 70- ohm N connectors are designed for cables such as RG-61C, RG-11/U, and RG-13/U. The 70-ohm connectors will not mate with 50-ohm connectors of this series. Figure 1-29 shows three typical N series connectors. Figure 1-30 illustrates the method used to attach N connectors to coaxial cable. Table 1-16 shows which N connector to use with what rf cable type. Figure 1-27.—Typical HN connectors.






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.